# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
#	           ChangeSet	1.930.107.4+1.930.136.24 -> 1.930.107.5
#	      fs/proc/base.c	1.12.1.1 -> 1.14   
#	            Makefile	1.190.1.19 -> 1.193.1.16
#	drivers/scsi/Makefile	1.15.2.4 -> 1.15.4.1
#	include/linux/pci_ids.h	1.44.1.17 -> 1.46.1.12
#	drivers/scsi/Config.in	1.15.1.2 -> 1.18   
#
diff -Nru a/Makefile b/Makefile
--- a/Makefile	Wed Oct  8 09:08:53 2003
+++ b/Makefile	Wed Oct  8 09:08:53 2003
@@ -90,6 +90,7 @@
 
 CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
 	  -fno-strict-aliasing -fno-common
+CFLAGS += -g
 ifndef CONFIG_FRAME_POINTER
 CFLAGS += -fomit-frame-pointer
 endif
@@ -300,8 +301,7 @@
 	$(CONFIG_SHELL) scripts/Configure -d arch/$(ARCH)/config.in
 
 xconfig: symlinks
-	$(MAKE) -C scripts kconfig.tk
-	wish -f scripts/kconfig.tk
+	@echo -e "***\n* Sorry, xconfig is broken; use \"make menuconfig\" instead.\n***"
 
 menuconfig: include/linux/version.h symlinks
 	$(MAKE) -C scripts/lxdialog all
diff -Nru a/drivers/scsi/Config.in b/drivers/scsi/Config.in
--- a/drivers/scsi/Config.in	Wed Oct  8 09:08:53 2003
+++ b/drivers/scsi/Config.in	Wed Oct  8 09:08:53 2003
@@ -184,6 +184,7 @@
       bool '   Include loadable firmware in driver' CONFIG_SCSI_QLOGIC_FC_FIRMWARE
    fi
    dep_tristate 'Qlogic QLA 1280 SCSI support' CONFIG_SCSI_QLOGIC_1280 $CONFIG_SCSI
+   dep_tristate 'Qlogic QLA 2100 driver support' CONFIG_SCSI_QLOGIC_QLA2100 $CONFIG_SCSI
 fi
 if [ "$CONFIG_X86" = "y" ]; then
    dep_tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE $CONFIG_SCSI
diff -Nru a/drivers/scsi/Makefile b/drivers/scsi/Makefile
--- a/drivers/scsi/Makefile	Wed Oct  8 09:08:53 2003
+++ b/drivers/scsi/Makefile	Wed Oct  8 09:08:53 2003
@@ -54,6 +54,7 @@
 obj-$(CONFIG_SUN3_SCSI)		+= sun3_scsi.o  sun3_scsi_vme.o
 obj-$(CONFIG_MVME16x_SCSI)	+= mvme16x.o	53c7xx.o
 obj-$(CONFIG_BVME6000_SCSI)	+= bvme6000.o	53c7xx.o
+obj-$(CONFIG_HP_SIMSCSI)	+= simscsi.o
 obj-$(CONFIG_SCSI_SIM710)	+= sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)	+= advansys.o
 obj-$(CONFIG_SCSI_PCI2000)	+= pci2000.o
@@ -88,6 +89,7 @@
 obj-$(CONFIG_SCSI_QLOGIC_ISP)	+= qlogicisp.o 
 obj-$(CONFIG_SCSI_QLOGIC_FC)	+= qlogicfc.o 
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o 
+obj-$(CONFIG_SCSI_QLOGIC_QLA2100) += qla2x00.o
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
 obj-$(CONFIG_SCSI_SEAGATE)	+= seagate.o
 obj-$(CONFIG_SCSI_FD_8xx)	+= seagate.o
diff -Nru a/fs/proc/base.c b/fs/proc/base.c
--- a/fs/proc/base.c	Wed Oct  8 09:08:53 2003
+++ b/fs/proc/base.c	Wed Oct  8 09:08:53 2003
@@ -443,7 +443,24 @@
 }
 #endif
 
+static loff_t mem_lseek(struct file * file, loff_t offset, int orig)
+{
+	switch (orig) {
+	      case 0:
+		file->f_pos = offset;
+		break;
+	      case 1:
+		file->f_pos += offset;
+		break;
+	      default:
+		return -EINVAL;
+	}
+	force_successful_syscall_return();
+	return file->f_pos;
+}
+
 static struct file_operations proc_mem_operations = {
+	llseek:		mem_lseek,
 	read:		mem_read,
 	write:		mem_write,
 	open:		mem_open,
diff -Nru a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h	Wed Oct  8 09:08:53 2003
+++ b/include/linux/pci_ids.h	Wed Oct  8 09:08:53 2003
@@ -544,6 +544,7 @@
 #define PCI_DEVICE_ID_HP_ZX1_SBA	0x1229
 #define PCI_DEVICE_ID_HP_ZX1_IOC	0x122a
 #define PCI_DEVICE_ID_HP_ZX1_LBA	0x122e
+#define PCI_DEVICE_ID_HP_SX1000_IOC	0x127c
 
 #define PCI_VENDOR_ID_PCTECH		0x1042
 #define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000